S1AL thru S1ML Taiwan Semiconductor CREAT BY ART FEATURES Surface Mount Rectifier - Glass passivated junction chip - Ideal for automated placement - Low-Profile Package - Low power loss, high efficiency - Moisture sensitivity level: level 1, per J-STD-020 - Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC - Halogen-free according to IEC 61249-2-21 definition MECHANICAL DATA Case: Sub SMA Sub SMA Molding compound, UL flammability classification rating 94V-0 Base P/N with suffix "G" on packing code - green compound (halogen-free) Base P/N with prefix "H" on packing code - AEC-Q101 qualified Terminal: Matte tin plated leads, solderable per JESD22-B102 Meet JESD 201 class 1A whisker test with prefix "H" on packing code meet JESD 201 class 2 whisker test Polarity: Indicated by cathode band Weight: 0.019 g (approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25 unless otherwise noted) PARAMETER SYMBOL Marking code S1AL S1BL S1DL S1GL S1JL S1KL S1ML 1AL 1BL 1DL 1GL 1JL 1KL 1ML UNIT Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current IF(AV) 1 A Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load IFSM 30 A Maximum instantaneous forward voltage (Note 1) @1A VF 1.1 V Maximum reverse current @ rated VR TJ=25 TJ=125 IR Typical junction capacitance (Note 2) Cj 9 pF Typical reverse recovery time (Note 3) Trr 1.8 s Typical thermal resistance RJL RJA Operating junction temperature range Storage temperature range TJ TSTG 5 A 50 25 85 30 85 O C/W - 55 to +175 O C - 55 to +175 O C Note 1: Pulse test with PW=300s, 1% duty cycle Note 2: Measured at 1 MHz and Applied VR=4.0 Volts. Note 3: Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A Document Number: DS_D1405032 Version: M14 S1AL thru S1ML Taiwan Semiconductor ORDERING INFORMATION PART NO. PACKAGE PACKING Sub SMA Sub SMA Sub SMA Sub SMA Sub SMA Sub SMA Sub SMA Sub SMA Sub SMA Sub SMA 1,800 / 7" Plastic reel (8mm tape) 3,000 / 7" Plastic reel (8mm tape) 7,500 / 13" Paper reel (8mm tape) 7,500 / 13" Plastic reel (8mm tape) 10,000 / 13" Paper reel (8mm tape) 10,000 / 13" Plastic reel (8mm tape) 1,800 / 7" Plastic reel (12mm tape) 3,000 / 7" Plastic reel (12mm tape) 7,500 / 13" Paper reel (12mm tape) 7,500 / 13" Plastic reel (12mm tape) RH Sub SMA 10,000 / 13" Paper reel (12mm tape) MH Sub SMA 10,000 / 13" Plastic reel (12mm tape) PACKING CODE AEC-Q101 GREEN COMPOUND CODE QUALIFIED S1xL (Note 1) RU RV RT MT RQ MQ R3 RF R2 M2 Prefix "H" Suffix "G" Note 1: "x" defines voltage from 50V (S1AL) to 1000V (S1ML) EXAMPLE PREFERRED P/N PART NO. S1ML RU S1ML S1ML RUG S1ML S1MLHRU AEC-Q101 PACKING CODE QUALIFIED GREEN COMPOUND DESCRIPTION CODE RU RU H S1ML G Green compound RU AEC-Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA=25 unless otherwise noted) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE 1 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 150 175 INSTANTANEOUS REVERSE CURRENT (A) AVERAGE FORWARD CURRENT (A) 1.2 FIG. 2- TYPICAL REVERSE CHARACTERISTICS 100 10 TJ=125 1 TJ=75 0.1 0.01 TJ=25 0.001 0 LEAD TEMPERATURE (oC) 100 INSTANTANEOUS FORWARD CURRENT (A) PEAK FORWARD SURGE CURRENT (A) FIG. 3- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 10 8.3ms Single Half Sine Wave. 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) 140 FIG. 4- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 10 1 0.1 0.01 1 1 10 NUMBER OF CYCLES AT 60 Hz Document Number: DS_D1405032 100 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 FORWARD VOLTAGE (V) Version: M14 S1AL thru S1ML Taiwan Semiconductor FIG. 5- TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE (pF) 100 f=1.0MHz Vsig=50mVp-p 10 1 0.01 0.1 1 10 100 REVERSE VOLTAGE (V) PACKAGE OUTLINE DIMENSIONS Unit (mm) DIM. Unit (inch) Min Max Min Max B 1.70 1.90 0.067 0.075 C 2.70 2.90 0.106 0.114 D 0.16 0.30 0.006 0.012 E 1.23 1.43 0.048 0.056 F 0.80 1.20 0.031 0.047 G 3.40 3.80 0.134 0.150 H 2.45 2.60 0.096 0.102 I 0.35 0.85 0.014 0.033 J 0.00 0.10 0.000 0.004 SUGGESTED PAD LAYOUT Symbol Unit (mm) Unit (inch) A 1.4 0.055 B 1.2 0.047 C 3.1 0.122 D 1.9 0.075 E 4.3 0.169 MARKING DIAGRAM P/N = Marking Code G = Green Compound YW = Date Code F = Factory Code Document Number: DS_D1405032 Version: M14 S1AL thru S1ML Taiwan Semiconductor CREAT BY ART Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied,to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or seling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. Document Number: DS_D1405032 Version: M14